This is the setup for a DHCP IP address for the RED interface. The IPFire device is connected to a network and is leasing an IP address over the DHCP protocol. The steps are very easy!
- Choose DHCP
- choose OK
![Choose internet connection type](/docs/installation/red/dhcp/interface_red_dhcp_v1.png?s=960&revision=2021-11-10+23%3A12%3A40.289949)
done!
This is the setup for a DHCP IP address for the RED interface. The IPFire device is connected to a network and is leasing an IP address over the DHCP protocol. The steps are very easy!
done!